10. Activating a shift
00 8811 17, 08/18 (Rev. 6.0) 53
The symbol for shift operation is displayed in the title bar. The operation
is completed.
Deactivating the shift
You wish to deactivate the active shift, the ward should not be divided into
zones.
Proceed as in the previous section. Only do not activate a new shift after
you have deactivated the active one.
= Symbol for shift operation.
NOTE! Ward coupling (see page 47 onwards). disables shifts.
That means, an active shift will be deactivated, if ward coupling
is activated. The ward will no longer be divided into zones. In
the title bar the symbol for ward coupling is displayed.
To Next Page
Loading...