Tunstall ComStation BUS-C - If No Connection“ is Displayed

2. For safety
00 8811 17, 08/18 (Rev. 6.0) 5
 Inform a responsible technician about the fault. S/he will then deal with
correcting the fault.
 To return the to the main window, press the following button:
 The main window appears again. You can resume work.
Acoustic fault display
The acoustic fault display sounds, when there is a new fault.
The acoustic fault display is turned off, when the fault is cleared or when you
have displayed the fault in the described manner. In the second case the
acoustic fault display is turned off, although the fault has not yet been
cleared.
2.3 If „no connection“ is displayed...
If the symbol for „no connection“ appears in the title bar, you must
deal with it immediately.
The connection of the ComStation
BUS-C
to the nurse call system is restricted
or failed.
You must immediately do the following:
 Inform a responsible technician.
NOTE! For the meaning of location name and participant num-
ber please the technician should refer to the online help for the
„SystemOrganizer“ configuration software.
NO CONNECTION!