Tunstall ComStation BUS-C - If a Fault is Displayed

2. For safety
4 00 8811 17, 08/18 (Rev. 6.0)
2.2 If a fault is displayed...
If the symbol for faults appears in the title bar, you must deal with it
immediately.
There is a fault in the nurse call system. This means that perhaps you can no
longer be called from every room. Additionally your are informed acoustically
about the fault by the repeated tone sequence “1 second tone - 20 seconds
pause“.
You must immediately do the following:
 Press „System“ > „Info“ > „Fault“.
 All rooms with faults are shown.
The tone for the fault display is turned off.
[1] Location name
[2] Participant number
FAULT!