00 8811 17, 08/18 (Rev. 6.0) 65
13. Cleaning and disinfection
Important notices
Do not use harsh or abrasive cleaning material or scouring cream.
Non residue-free cleaning fluids collect in the spaces of the housing.
When cleaning or disinfecting, do not touch any electrical contacts.
The ComStation
BUS-C
is not water-proof. Therefore, do not immerse it into
water or cleaning solutions.
Comply with the applicable directives for hygiene at your hospital.
How to proceed
Basically, the ComStation
BUS-C
can be cleaned with a moist tissue using di-
luted and residue-free household cleaners or detergents.
The ComStation
BUS-C
is suitable for moist wipe disinfection. Recommended
medium for disinfecting, e.g. Dismozon pur (0.5%) from Bode Chemie, Ham-
burg, Germany. This oxygen-active surface cleaner and disinfectant features
the comprehensive ingredient Magnesium monoperoxyphthalatehexahy-
drate (MMPP). Before using the disinfectant, read the manufacturer's instruc-
tions.
When selecting a cleaning medium or a disinfectant, the following notes to
the product materials should be considered.
Product materials
The housing is made from the user-friendly plastic ABS. ABS features a good
resistance against dilute organic and inorganic acids, lye, saline solutions as
well as against most animal and vegetable fats and oils. However, concen-
trated mineral acids, aromatic hydrocarbons, hydrogen chlorides, esters,
ether and ketones are aggressive for ABS. Therefore, do not use any clean-
ing or disinfecting media which contain the before-mentioned ingredients.
The display is made from transparent polycarbonate. This polycarbonate is
resistant against dilute acids, oils and ethanol. However, polycarbonate is not
To Next Page
Loading...