Turbosol UNI 30 E - 2 General Information; General and Contact Information

EN
UNI 30 E 17261 - 561.228 2 - GENERAL INFORMATION
Cap. 2 - Pag. 3/3
THIS MANUAL IS PROPERTY OF - ANY TOTAL OR PARTIAL REPRODUCTION IS STRICTLY FORBIDDEN
2.6 GENERAL AND CONTACT INFORMATION
The conveyors and UNI 30 E mortar sprayers can be supplied with different set-ups and with different accessories, therefore
not all components described in this manual are necessarily mounted on your machine.
The Customer Service department of Turbosol Produzione S.p.A. will be glad to provide any information you may need.
Turbosol Produzione S.p.A.
Via Volta, 1
31030 Pero di Breda di Piave (TV) - ITALIA
Tel. +39 - 0422 - 90.2.51
Fax +39 - 0422 - 90.44.08
website: www.turbosol.it
e-mail: info@turbosol.it
TURBOSOL MACHINES
They are the result of years of experience and constant research. The "know how" acquired in this way, along with great
attention to quality, constitutes the fundamental guarantee for the manufacturing of machines with long duration, great reliability
and reduced management costs.
MAINTENANCE AND CARE
Proper maintenance and care are essential for the machine to work as designed. It is therefore extremely important that users
respect the recommended maintenance intervals and carry out any maintenance required, both to keep the machine in perfect
running order and to preserve the validity of the warranty.
SAFETY
All service staff must be informed of the Safety Standards. The general Standards relative to safety and accident prevention
envisioned by local legislation must also be complied with.
OPERATOR TRAINING
The operator must receive specific training for the correct use of the machine.
Turbosol periodically carries out training courses, also on specific request of the customer.
TURBOSOL SERVICE
Please contact your TURBOSOL dealer for any request regarding machine malfunctions or requests for spare parts.
Turbosol Produzione S.p.A. reserves the right to make any technical modification for machine improvement, even if not
contemplated in this manual. Some drawings and representations may be indicative.