user manual
LMS-D24/26
LMS-D2X user manual
Page 13
Navigation and Viewing Parameters
(Note: The LMS-D26 is shown in all the following screen shots; however the features and
parameters apply equally to the LMS-D24)
Many of the processing elements in each input and output path have features that may be
controlled by the user, such as gain, frequency or limiter threshold. We call these adjustable
features parameters.
A parameter may be adjusted when it is displayed by turning one of the three-parameter knobs.
Each of the three-parameter knobs is associated with a zone on the display. Adjusting the leftmost
parameter knob will change the value of the parameter showing in the leftmost zone of the display
and so on. Turn a knob clockwise to increase the value of a parameter, or anti-clockwise to
decrease it. The knobs are velocity-sensitive so turning a knob rapidly will cause the action to
‘accelerate’, so the value changes more rapidly.
LMS-D26
In A Freq Width Gain
EQ1 100Hz 1.4Q 0.0dB
a
b
c
cba
To Next Page
Loading...
Need help?
General
