Turbosound LMS-D26 - Output Channel Processing; Output Gain and Polarity; Output Delay Setting

user manual
LMS-D24/26
LMS-D2X user manual
Page 21
OUTPUT CHANNELS
Gain and Polarity
LMS-D26
Out1 Gain Pol
0.0dB Rev
ab
c
a b
Knob A: Gain, adjustable in 0.2dB steps from –80 dB to +20dB
Knob B: Polarity, selectable, normal or reversed with reference to other outputs
Delay
LMS-D26
Out1 Delay
1.50ms
ab
c
a
Knob A: Adjustable in variable steps from 0 to 80ms
As for input delay, velocity sensitive Parameter Knobs provide finer adjustment at low levels and
rapid selection of higher values.