user manual
LMS-D24/26
LMS-D2X user manual
Page 16
Preset Store
To store the current Preset in a user location, press the Preset Store Button so the indicator above
it illuminates. Turn the first parameter knob until the required Preset location number is show on
the display. A Preset name of up to 12 characters in length can be entered using parameter knobs
B and C. Pressing the Store Button again completes the process and stores the Preset. As with
Preset Recall, pressing any other button cancels the operation.
LMS-D26
Preset Name
Store 32 My System
ab
c
SELECT STORE
LOCATION
a
STORE STORE
cb
NAME PRESET
The user can overwrite non-protected Presets only; if an attempt is made to save a Preset in a
location already occupied by a basic or
Factory Preset
a ‘LOCKED PRESET’ message is displayed.
To Next Page
Loading...
