Turbosound LMS-D26 - DSP Input Channel Processing; Input Gain Adjustment; Input Delay Adjustment

user manual
LMS-D24/26
LMS-D2X user manual
Page 18
DSP PROCESSING
Input Channels
Gain
LMS-D26
In A Gain
0.0dB
ab
c
a
Knob A: Gain, adjustable in 0.2dB steps from –80 dB to +20dB
Delay
LMS-D26
In A Delay
1.50ms
ab
c
a
Knob A: Delay, adjustable in variable steps from 0 to 400ms
The delay parameter is adjustable in fine steps at low values; the adjustment becomes
progressively coarser as the value increases. The velocity sensitive Parameter Knobs therefore
provide accurate setting of driver offset delays (typically below 10ms) and rapid setting of longer
system alignment delays.