Setting
Setting via IO-Link
26
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Explanation Options Function
PASS
Password protection Define password and activate password pro-
tection
0000 No password
rES
Reset FacT Reset the parameters to the factory setting
Undo Reset of the parameters since the last unlock-
ing of the sensor
SOF
Software version
9.2 Setting via IO-Link
The device can be parameterized within the technical specifications (see data sheet) via the IO-
Link communication interface – both offline, e.g. with the configuration tool as well as also on-
line via the controller. An overview of the different functions and properties that can be set and
used for IO-Link or SIO mode can be found in the chapter “Setting” and in the IO-Link para-
meter manual of the device. Detailed instructions on the parameterization of devices via the IO-
Link interface are provided in the IO-Link commissioning manual.
All the parameters can be changed in IO-Link mode via the controller during commissioning as
well as during operation. In SIO mode the device operates according to the last setting made in
IO-Link mode.
To Next Page
Loading...
