22
© Turntide Technologies. Condential. All Rights Reserved. DOCT00369-082321 Last Modied: 2023-03-09
Only Some VRV Devices Discovered
Discovery Timeout Too Short
If not all the VRV devices on a network are found while running discovery, the Timeout in Seconds may have been too low,
especially on larger VRV networks. Adjust the timeout length up and rerun discovery.
VRV Device not Connected
If the same devices are not appearing on repeated attempts to discover them, check the physical VRV unit. Ensure the
VRV device is powered and the F1F2 network cables are well terminated.
To Next Page
Loading...