TURNTIDE Hub 7 - Connecting Power; Power Requirements; Powering with Turntide Enclosure

8
© Turntide Technologies. Condential. All Rights Reserved. DOCT00369-082321 Last Modied: 2023-03-09
3.3. Connecting Power
3.3.1. Power Requirements
Warning: Electrical work is dangerous and should only be completed by a skilled and qualied person. All electrical
procedures must be carried out with the power supply shut off. Do not turn the power supply on until all
connections are made. Not doing so may result in electric shock.
3.3.2. Powering with Turntide Enclosure
The Turntide Enclosure is shipped with all required equipment power supplies and wiring completed. A 120VAC power feed
is required to be wired into the supplied breaker.