Tusa ZEN - Set Watch Cdt

27
Set Watch CDT
Upon access, the Set CDT screen displays the graphics CDT and
SEt and the CDT (hr:min) with clock icon, the Hour Set Point
flashing (Fig. 17A).
• Depressing the S button will scroll upward through the Hour
Set Points in 1 hour increments at a rate of 8 per second.
• Pressing and releasing the S button momentarily and
repeatedly (< 2 sec each time) will step upward through the
set Points one at a time.
• Pressing and releasing the A button momentarily (< 2 sec)
will save the Hour Set Point and the Minutes digits will
flash.
• Depressing the S button will scroll upward through the
Minute Set Points in 1 minute increments at a rate of 8 per
second.
• Pressing and releasing the A button momentarily (< 2 sec)
will save the Minutes Set Point and revert to the CDT Status
screen with the graphic OFF (flashing) in place of the
graphic SEt (Fig. 17B).
• Pressing and releasing the S button momentarily (< 2 sec)
will toggle from OFF to ON and Start the Timer.
• Depressing the M button for 2 seconds will revert to the
Watch Default Time screen.
• If no button is pressed during a period of 2 minutes,
operation will revert to the Watch Default Time screen.
Fig. 17A - SET WATCH CDT
Fig. 17B - CDT STATUS
(set, ready)