To Next PageTo Next Page
Need help?Do you have a question about the Tusa ZEN and is the answer not in the manual?
Overview and welcome to the ZEN dive computer.
Explanation of the four control buttons (M, S, L, A).
Setting and using the current time at your home location.
Displays current time at a remote travel location.
Functions for setting and using a countdown timer.
Explains Nitrogen, Oxygen, and Ascent Rate bar graphs.
Explains depth, time, date, temperature, and altitude displays.
Overview of NORM, GAUG, and FREE dive modes.
Accessing NORM, GAUG, or FREE Surface Main screens.
Configuring oxygen percentage for Nitrox dives.
Option to enable or disable audible alarms.
Setting depth-based alarms.
Setting alarms for Partial Pressure of Oxygen.
Enabling automatic dive mode activation via water contact.
Adjusting conservatism for dive calculations.
Monitors remaining no-decompression time based on depth.
Provides visual feedback on ascent speed.
Operates as a depth gauge/timer without nitrogen/oxygen calculations.
Mode for freediving activities.
Step-by-step guide for removing the battery.
Step-by-step guide for installing a new battery.
Details the algorithms and standards used by the computer.
Explanation of Nitrogen, Oxygen, and Ascent Rate bar graphs.
General| Display | LCD |
|---|---|
| User Replaceable Battery | Yes |
| Battery Type | CR2450 |
| Modes | Air, Nitrox, Gauge |
| Max Depth | 100 meters |
| Water Resistance | 100 meters |
