Tusa ZEN - SET U GROUP (Utilities); Set Wet Activation

52
SET U GROUP (UTILITIES)
Sequence -
SET U >> Wet Activation >> Units >> Safety Stop >> Conserva-
tive Factor >> Backlight Duration >> Sampling Rate.
> Depressing the A and S buttons simultaneously for 6
seconds while the NORM (or GAUG) Surface Main screen
is displayed, will access the Set U screen (Fig. 43).
> Pressing and releasing the A button momentarily (< 2 sec)
while Set U is displayed will access Set Wet Activation.
Set Wet Activation information includes (Fig. 44):
> Graphics WET and ACt.
> Set Point graphic ON (or OFF) flashing.
• Pressing and releasing the S button momentarily (< 2 sec)
will toggle between ON and OFF.
• Pressing and releasing the A button momentarily (< 2 sec)
will save the setting and access Set Units.
• Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert to the Set U screen.
• Depressing holding the M button for 2 seconds, or if no
button is pressed for a period of 2 minutes, operation will
revert to the NORM (or GAUG) Surface Main screen.
Fig. 43 - SET U
Fig. 44 - SET WET
ACTIVATION