79
NOTE: Upon entry into the following Violation modes, the Alarm will
sound, even if Set OFF. When these events occur, the Alarm cannot
be acknowledged (silenced) by pressing the S button.
DELAYED VIOLATION #1 (DV1)
If you remain above the required Deco Ceiling Depth for more than 5 minutes, the full
NiBG will flash until you descend below the required Stop Depth.
This is a continuation of a Conditional Violation.
DV1 Main information includes (Fig. 74) -
> Full NiBG (flashing), O2BG if applicable
> TAT (hr:min) with Deco mode icon (stop bar flashing)
> Stop Depth with FT (or M) icon and STOP icon (flashing)
> Stop Time (hr:min) with clock icon
> Down Arrow icon (flashing)
> Tank icon (Gas 1 or 2)
> Current Depth with FT (or M) icon
• Press and release the A button (< 2 sec) to view ALT screens
which are similar to those previously described for the
Deep Stop (page 73).
• Depress the M button for 2 seconds to access the Gas
Switch Routine.
• Press the L button to activate the Backlight.
Fig. 74 - DV1 MAIN
To Next Page
Loading...
