Tusa ELEMENT - User Manual

Allows selection of display options, access to information, and entering settings.

Displays nitrogen loading and oxygen accumulation visually using bar segments.

Provides a visual representation of ascent speed, like an ascent speedometer.

Shows current, maximum, and required stop depth during dives.

Displays time in hour:minute format, indicating elapsed dive time and time of day.

Details voltage checks and the visual warning when battery needs replacement.

Covers manual activation, diagnostic mode, serial number display, and altitude calibration.

Configuration menu for adjusting FO2, units, time, alarms, and dive stops.

Provides theoretical dive times for depths from 30 to 190 FT.

Mode for dives without mandatory decompression stops.

Occurs if ascending shallower than the required Decompression Stop Depth.

Triggered by remaining above a required Deco Stop Depth for over 5 minutes.

The first 10 minutes post-dive, displaying Surface Interval and other data.

Timers assisting decisions for flying or traveling to higher elevations.

Step-by-step guide for clearing data using a specific Key Code.

Protect from shock, temperatures, chemicals; clean with fresh water.

Guide on correctly inserting the new battery and retaining bar.

Lists various modes such as Activation, Surface, and Dive Log.

Covers operational range, pressure sampling, and limit adjustments.