59
RETURNING THE MODULE TO BOOT
• If the Boot was fitted with a Spacer and it was previously removed, replace the
Spacer into the Boot.
• Orient the Module over the opening in the Boot, and dip the bottom edge into it while
pressing the top edge with the palm of your hand. Stop pressing when the bottom
edge of the Module has just entered the Boot.
• Correct the alignment of the Module as needed so that it is straight.
• Press the Module completely into place with your thumbs, watching the alignment,
until it snaps into place.
UNEXPECTED LOSS OF DISPLAYED INFORMATION
If your Element stops working for any reason, it is important that you have anticipated this
possibility and are prepared for it. This is an important reason for not pushing
the No Decompression and Oxygen Limits, and a critical reason to avoid
entering Decompression.
If you dive in situations where your trip would be ruined or your safety would be jeopar-
dized by losing the use of your Element, a backup instrument system is highly recom-
mended.
To Next Page
Loading...
