Tusa ELEMENT - To Set Hour Format

23
TO SET - HOUR FORMAT
Factory set for 12 Hour (12: AM to 11: PM), the Hour Format
can also be set for 24 Hour (0: to 23: hours).
• After having set and accepted Units, the Set Hour Format
screen appears with the Set Point flashing (Fig. 20).
- - or - -
• While the Surface Sequence is scrolling, depress the button
for 8 seconds to bypass Set FO2, Wet Activation, and Units,
then release the button.
• Press/release the button (less than 2 seconds) to toggle
between 12 and 24.
• Depress the button for 2 seconds to accept the Set Point and
advance to Set Time.
Fig. 20 - SET HOUR
FORMAT