Tusa ELEMENT - SPECIFICATIONS; OPERATIONAL MODES

61
CAN BE USED AS
• Air Computer
• Nitrox Computer
DIVE COMPUTER PERFORMANCE
• Buhlmann ZHL-16c based Pelagic Z+ algorithm
• No Deco limits closely follow PADI RDP
• Decompression in agreement with Buhlmann
ZHL-16c and French MN90
• No Deco Deep Stops - Morroni, Bennett
• Deco Stops (not recommended) - Blatteau,
Gerth, Gutvik
• Altitude - Buhlmann, IANTD, RDP (Cross)
• Altitude corrections and O2 limits based on
NOAA tables
OPERATIONAL MODES
• Activation/Diagnostic
• Serial Number
• Surface
• Time to Fly Countdown
• Desaturation Countdown
• Pre Dive Planner
30 to 190 FT (9 to 57 M)
• Dive Log (Preview, Dive Data, O2 Data)
• Reset
• Set FO2 (Air, 21 to 50%)
• Set Wet Activation (On / Off)
• Set Units of Measure (Imperial / Metric)
• Set Hour Format (12 / 24)
• Set Time (Hour, Minute)
• Set PO2 Alarm (1.20 to 1.60 ATA)
• Set FO2 50% Default (On/Off)
• No Decompression Dive:
• Main
• Alt # 1
• Alt # 2 -only if nitrox dive
• Deep Stop - for dives deeper than 80 FT (24 M)
• Safety Stop - for dives deeper than 30 FT (9 M)
• Decompression Stop:
• Main
• Alt # 1
• Alt # 2
• Alt # 3 - only if a nitrox dive
• Violation - Conditional, Delayed # 1, # 2, and # 3
• High PO2
• High O2
SPECIFICATIONS