54
CARE AND CLEANING
Protect your Element from shock, excessive temperatures, chemi-
cal attack, and tampering. Protect the lens against scratches
with a transparent Instrument Lens Protector. Small scratches will
naturally disappear underwater.
• Soak and rinse the Element in fresh water at the end of each
day of diving, and check to ensure that the areas around the
low pressure (depth) sensor (Fig. 61a) and button are free of
debris or obstructions.
• To dissolve salt crystals, use lukewarm water or a 50% white
vinegar/50% fresh water bath. After removal from the bath,
place the unit under gently running water and towel dry
before storing.
• Transport your unit cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Element should be inspected annually by an Autho-
rized TUSA Dealer who will perform a factory prescribed func-
tion check and inspection for damage or wear. To keep the
product's warranty in effect, this inspection must be completed
one year after purchase (+/- 30 days). TUSA recommends that
you continue to have this inspection performed every year to
ensure it is working properly.
To Obtain Service
Take your Element to an Authorized TUSA Dealer.
Fig. 61 - BACK OF CASE
a
To Next Page
Loading...
