nextec™ — Predicts. Protects. Performs.
Safety Testing Certications
This Fill-Rite line of pumps have been safety tested for compliance to strict regulatory standards. Check the information
on the motor barrel label of your pump to determine the certications that are applicable to your particular model.
The following standards were used to show compliance in North America:
UL 674 – Electric Motors and Generators for Use in Division 1 Hazardous (Classied) Locations, 5th Edition.
The following standards were used to show compliance in the European Union:
Directive 2006/42/EC – Directive on machinery.
EN 809:1998 +A:2009 – Pumps and pump units for liquids – Common safety requirements.
EN ISO 12100:2010 – Safety of Machinery – Basic concepts, general principles for design.
Directive 2004/108/EC – Electromagnetic compatibility.
Directive 2011/65/EU – Restrictions of the use of certain hazardous substances in electrical and electronic equipment.
ISO 80079-36 = Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method
and requirements.
ISO 80079-37 = Explosive atmospheres - Part 37: Non-electical equipment for explosive atmospheres - Non-electrical
type of protection constructional safety “c”, control over ignition source “b”, liquid immursion “k”.
EN 60079-0:2012+A11:2013 – Explosive atmospheres – Part 0: Equipment – General requirements.
EN 60079-1:2014 – Explosive atmospheres – Part 1: Equipment protection by ameproof enclosures “d”.
IEC 60079-0 – Explosive atmospheres – Part 0: Equipment – General requirements.
IEC 60079-1 – Explosive atmospheres – Part 1: Equipment protection by ameproof enclosures “d”.
The fasteners used to assemble the ame-proof enclosure are of a property class (grade) 12.9.
Manufacturer is to be contacted for information on the dimensions of the ameproof joints.
View other fuel transfer systems and parts made by Fill-Rite on our website.
To Previous Page
Loading...
Need help?
General
