TVS electronics LP 46 LITE - 1.6 Media Specifications

5
Ribbon wound type
Outside wound
1.6 Media Specifications
Media Specifications
LP 46 Lite
Label roll capacity
Max. 5” OD
Media type
Continuous, die-cut, black mark, fan-fold, notch
Media wound type
Outside wound
Media width
20mm ~ Max. 112 mm
Media thickness
0.06 mm (2.36 mil) ~ 0.19 mm (7.48 mil)
Media core diameter
1” (25.4 mm) & 1.5” (38 mm) ID core
Label length
5 mm ~ Max. printing length
Label length (peeler
mode)
N/A
Label length (cutter
mode)
N/A
Gap height
Min. 2 mm (0.09”)
Black mark height
Min. 2 mm (0.09”)
Black mark width
Min. 8 mm (0.31”)