TVS electronics LP 46 LITE - 4. LED and Button Functions; 4.1 LED Indicator; 4.2 Regular Button Functions

18
4. Refer to chapter 3.3.1 to install the
label. Use “Diagnostic Tool” to set
the media sensor type and calibrate
the selected sensor.
Note:
Please calibrate the gap/black mark sensor when changing media.
4. LED and Button Functions
This printer has one button and one three-color LED indicator. By indicating the LED with
different color and pressing the button, printer can feed labels, pause the printing job, select
and calibrate the media sensor, print printer self-test report, reset printer to defaults
(initialization). Please refer to the button operation below for different functions.
4.1 LED Indicator
LED Color
Description
Green/Solid
This illuminates that the power is on and the device is
ready to use.
Green/Flash
This illuminates that the system is downloading data from
PC to memory or the printer is paused.
Amber
This illuminates that the system is clearing data from
printer.
Red/Solid
This illuminates printer head open, cutter error.
Red/Flash
This illuminates a printing error, such as head open,
paper empty, paper jam, ribbon empty, or memory error
etc.
4.2 Regular Button Functions
1. Feed labels