TVS King GS+ - Switch Assembly RH

FEATURES IN YOUR VEHICLE
TVS King comes with DC headlamp. In this switch position,
‘ ’head lamp also will glow along with speedometer
lamps, tail lamps, number plate lamp and position lamp
when engine is in running condition.
b) Wiper motor Switch
It has two positions
ON : Wiper motor operates in this position.
Do not operate the wiper motor on the dry wind shield
glass. During washing please ensure that the wiper motor
is wrapped with polythene sheet to prevent water entry.
c) Self Starter Switch
Do not operate the starter motor for more than 2 sec.
Press the‘ ’ switch to start the engine electrically with
ignition switch in ‘ON’ condition and transmission in
neutral.
OFF : Wiper motor stops operating in this position.
CAUTION
CAUTION
2. Switch assembly RH
It is located on the handlebar RH
WARNING
c
b
a
a) Head Lamp high/low beam switch
Press the knob towards ‘ ’ to operate in high beam of
the headlamp and towards ‘ ’ to operate in low beam.
b) Horn Switch:
Use appropriate beam (High / Low) as per the traffic and
road condition for safety and comfortable riding.
Press the button ‘ ’ provided on the RH switch assembly
to operate the horn.
17