TVS Stryker 3V 2021 - Engine Cum Transmission Oil Level Check

ENGINE CUM TRANSMISSION OIL LEVEL
Check the engine cum transmission oil level
periodically.
1. Place the vehicle on centre stand on a flat surface.
Wipe-off the surroundings of gauge oil level.
2. Remove the gauge oil level and wipe it clean.
3. Fix the gauge back to its mounting hole. Do not
thread in.
4. Take out the gauge and check the oil level.
5. The oil level should be between minimum and
maximum level marks of the gauge as shown in
the figure.
6. If the oil level is less than the minimum level, add
TVS TRU4 FULLY SYNTHETIC ( SAE 10W30 API
SL JASO MA2) or TVS TRU4 PREMIUM (SAE
10W30 API SL JASO MA2) upto the maximum
level mark.
7. Wipe out the oil traces with a clean cloth to
prevent dust accumulation and assemble back the
gauge oil level.
If the vehicle is driven with less engine cum
transmission oil, the engine components will be
severely damaged. Check the oil level as per the
schedule to avoid costly damage.
Do not fill excess oil as it may cause the oil leak.
Always use 'TVS TRU4 FULLY SYNTHETIC ( SAE
10W30 API SL JASO MA2) or TVS TRU4 PREMIUM
(SAE 10W30 API SL JASO MA2)
Maximum
Minimum
Caution
MAINTENANCE
43