EasyManuals Logo

twintex LCR Series User Manual

twintex LCR Series
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
- 24 -
7. TECHNICAL SPECIFICATIONS
The specifications apply when the LCR meter is powered on for at least 30 minutes under regulated temperature.
Model
10kHz
30kHz
200kHz
Measurement function
Test parameter
| Z|, |Y|, C, L, X, B, R, G, D, Q, θ
Test signal frequency
10k Hz: 100Hz,120Hz,1kHz,10kHz
30kHz: 100Hz,120Hz,1kHz,10kHz, 20kHz, 30kHz
200kHz: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz,
500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz,
10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz,
66.6kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz (38 points)
Basic accuracy
0.15%
0.1%
0.1%
Equivalent circuit
Series, Parallel
Mathematical function
Absolute Deviation and Percentage Deviation
Range mode
Auto, Hold, Manual Selection
Trigger mode
Internal, Manual, External, BUS
Measurement speed
Fast: max.30, Medium: 10, Slow: 3 (times/second) (1kHz)
Average times
1-255
Delay time
0-60s, step 1ms
Calibration function
Open circuit, Short circuit, Load
Measurement terminal
5-terminal
Display mode
Direct, Δ, Δ%, V/I (monitoring test voltage and current)
Display
5 digit 4.3-in LCD display
Measurement signal
Output impedance
30Ω, 100Ω
Test level
0.1V, 0.3V, 1V
0.1V, 0.3V, 1V
0.05V~1V
Test level accuracy
5%
Measurement display range
|Z|, R, X
0.01m Ω - 99.999 MΩ
|Y|, G, B
0.0001 µS - 99.999 S
C
0.0001 pF - 9.9999 F
L
0.0001 µH - 999.99 H
D
0.0001 - 9.9999
Q
0.0001 - 99999
θ (DEG)
-179.99º -179.99 º
θ (RAD)
-3.14159 - 3.14159
Δ%
-999.99% - 999.99%
Comparator and interface
Comparator
N/A
5-bin comparator
Memory
100 sets memories for internal parameter settings storage/save
500 sets for U disk parameter settings storage/save
Standard interface
RS232, USB HOST
RS232, USB HOST,
HANDLER
General
Operating environment
C - 40°C, ≤80%RH
Power source
110/220V±10%, 47~63Hz
Power consumption
30VA
Accessories
4-terminal Kelvin test clip leads, RS232 cable, power cord, operation manual
Dimensions
265W*100H*340D mm
Weight
Approx.3.5kg
For the purpose of product improvement, specifications are subject to change without prior notice.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the twintex LCR Series and is the answer not in the manual?

twintex LCR Series Specifications

General IconGeneral
Brandtwintex
ModelLCR Series
CategoryMeasuring Instruments
LanguageEnglish