TYAN S7010 - Page 70

70
http://www.tyan.com
3.2.14 Onboard Devices Configuration Sub-Menu
You can use this screen to view the Onboard Devices Configuration Menu. Use
the up and down arrow (/) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option. The settings are described on the
following pages.
Feature Option Description
Onboard Device and PCI Slots Configuration
Auto
Boots Graphic Adapter
Priority
Onboard VGA
Select which graphics controller
to use as the primary boot device.
Enabled
Onboard VGA device
Disabled
Enable / Disable onboard VGA
chip. Note: Do no disable if you
have not other VGA card
attachment.
Enabled
Marvell Chip
(optional for BTO)
Disabled
Enable/disable onboard Marvell
SAS/SATA chipset.
Auto
Enabled
Lan1/Lan2
Disabled
Enable/disable Lan controller
Enabled
Lan1/Lan2 OP-ROM
Disabled
Executed Lan OP-ROM or not
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Onboard Device and PCI Slots Configuration
Boots Graphic Adapter Priority
Onboard VGA device
Marvell Chip
Lan1
Lan1 OP-ROM
Lan2
Lan2 OP-ROM
[Auto]
[Enabled]
[Enabled]
[Auto]
[Disabled]
[Auto]
[Disabled]
Select which graphics
controller to use as the
primary boot device.
← → Select Screen
↑↓ Select Item
+/- Change Option
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit