TYAN S7010 - Page 74

74
http://www.tyan.com
Feature Option Description
Boot Settings Configuration
Enabled
Quick Boot
Disabled
This option allows user bypass BIOS self
test during POST.
Disabled
Quiet Boot
Enabled
Disabled: displays normal POST
messages.
Enabled: displays OEM log instead of
POST messages.
Force BIOS
Add On ROM Display Mode
Keep Current
Allows user to force BIOS/Option ROM of
add-on cards to be displayed during quiet
boot.
On
Bootup Num-Lock
Off
Selects Power-on state for Numlock.
Enabled
Wait for ‘F1’ If Error
Disabled
Waits for F1 key to be present if error
occurs.
Enabled
Hit ‘DEL’ Message Display
Disabled
Displays “Press DEL to run Setup” in
POST.
Disabled
Interrupt 19 Capture
Enabled
Enabled: allows option ROMs to trap
interrupt 19.
Disabled
Endless Boot
Enabled
Enable/Disable endless loop boot from
BBS table.