Need help?Do you have a question about the Tyco Electronics TE3124 and is the answer not in the manual?
General| Print Method | Thermal Transfer |
|---|---|
| Connectivity | USB |
| Maximum Label Width | 24 mm |
| Print Speed | 50 mm/s |
| Label Width | 9 mm to 24 mm |
| Maximum Label Length | 1000 mm |
| Supported Barcode Types | Code 39, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, Codabar |
| Power Supply | External power adapter |
General information and instructions for operating the printer.
Specifies the proper and intended purpose of the label printer.
Crucial safety guidelines and warnings for operating the printer safely.
Guidelines for responsible disposal and environmental considerations.
Visual guide to the printer's components and parts.
Steps for unboxing, preparing, and setting up the label printer.
Instructions for connecting the printer to power and other devices.
Procedure for powering on the printer after connections are made.
Details the layout and functions of the printer's control panel.
Explains symbols shown on the printer's display for status indication.
Describes the different operational states of the printer and their indicators.
Outlines the functions associated with the navigator pad keys.
Step-by-step guide for loading label rolls and continuous media.
Instructions for loading fanfold style label media.
Procedure for loading and preparing the transfer ribbon.
Adjusting the ribbon path to prevent wrinkling and ensure print quality.
How to adjust the printhead locking plungers for optimal printing.
Process to calibrate the paper feed for accurate label cutting.
General advice and precautions for cleaning the printer.
Steps to clean the print roller for optimal media transport.
Detailed instructions for cleaning the printhead to maintain print quality.
Categorizes different error states and their visual indicators.
Common problems and their corresponding causes and remedies.
Lists specific error messages, their causes, and solutions.
Specifies the dimensions and requirements for various label media.
Provides key dimensional specifications related to the printer's components.
Details dimensions and placement for reflex marks on media.
Specifies dimensions and requirements for cut-out marks on media.
Statement declaring compliance with EU regulations for safety and health.
To Next Page