CLEANING AND CHANGING FILTERS
■ OIL FILTER
Using a filter wrench turn the filter anti clockwise to
remove it. Lightly smear the rubber seal on the new
filter with oil to ensure, turn it clockwise until the seal
contacts the base and then turn it another 2/3 turn to
tighten it.
■ FUEL FILTER
This is the primary filter and removes water and coarse
dirt from the fuel. To clean it first close the tap then
remove the filter and wash it.
important
Never use petrol (gasoline) thinner or similar inflammable material to wash the
primary fuel filter.
After replacing the filter always bleed the system (see page 60)
To Next Page
Loading...
