Monitor handle jamming risk
Adjust the position of the monitor handle bracket with care and never
grasp the bracket’s locking mechanism.
2.3.2 Pedal radius adjustment
You have the option to adjust the OMEGO
®
Basic’s pedal radius to the patient’s needs
and the chosen therapy application.
• Loosen the screw on the foot rest with the provided hexagon screwdriver.
• Hold the foot rest and pull out the catch bolt (1).
• You can now adjust the radius of the foot rest on a scaled rail system (2).
• Let go of the catch bolt once you have established a suitable position and it will
automatically snap into place.
• Tighten the screw again with the hexagon screwdriver.
Image 6: Adjustment of the pedal radius
Adjusting the pedal radius while the cranks are in motion or during
therapy poses a jamming hazard:
While the cranks are spinning or a therapy session is in process,
neither the operator nor any other person may modify the device’s
pedal radius. Always end the therapy session before entering the main
menu for modifications.
Never attempt to modify a moving part!
To Next Page
Loading...
