11.1.4 Connecting extra multiple switch with filter indication
A = Ubiux Vigor appliance (For example a Ubiux Vigor appliance type 4-0)
B = Mulple switch with lter indicaon
C = Receiver for wireless remote control
D = Transmier with 2 sengs or 4 sengs
E = Splier
F = Modular cable: Note: For the modular cable that is used, the “tab” of both modular connectors must be mounted facing
the mark on the modular cable. Wire colors C1 - C6 may vary dependent on the type of modular cable used.
Ubiflux Vigor W325 615743-G Ubbink / 41