Ublox C099-F9P - E Reference Station ODIN-W2 UDP Client.txt; F F9 P Stationary Base Config C99.Txt

C099-F9P - User guide
UBX-18063024 - R16 Appendix Page 39 of 43
AT+UMRS=460800,2,8,1,1,0
AT&D0
AT&W
AT+CPWROFF
E Reference station ODIN-W2 UDP client.txt
Copy all the text below this line into a text file named “Base ODIN-W2 Station UDP client.txt”.
AT+UWSCA=0,4
AT+UWSC=0,0,1
AT+UWSC=0,2,"UBXWifi"
AT+UWSC=0,5,1
AT+UWSC=0,100,2
AT+UWSCA=0,1
AT+UWSCA=0,3
AT+UWCFG=1,0
AT+UMSM=1
AT+UDDRP=0,"udp://192.168.0.10:5003",2
AT+UMRS=460800,2,8,1,1,0
AT&D0
AT&W
AT+CPWROFF
F F9P Stationary Base config C99.txt
Note: The receiver will output messages upon configuration below setting, however, for stationary
base configuration, RTCM 1005 will only be output once the survey-in is completed, or the fixed
coordinates are entered for the base antenna. Use the u-center "Packet Console View" to verify
message output. Once surveyed in correctly, it will indicate a TIME solution mode in the u-center Data
view.
Copy all the text below this line into a text file named “F9P Base config C99.txt.
# Config changes format version 1.0
# created by u-center version 18.11 at 11:37:53 on Tuesday, 08 Jan 2019
[del]
[set]
RAM CFG-UART1INPROT-NMEA 0 # write value 0 to item id 10730002
Flash CFG-UART1INPROT-NMEA 0 # write value 0 to item id 10730002
RAM CFG-UART1INPROT-RTCM3X 0 # write value 0 to item id 10730004
Flash CFG-UART1INPROT-RTCM3X 0 # write value 0 to item id 10730004
RAM CFG-UART1OUTPROT-UBX 0 # write value 0 to item id 10740001
Flash CFG-UART1OUTPROT-UBX 0 # write value 0 to item id 10740001
RAM CFG-UART1OUTPROT-NMEA 0 # write value 0 to item id 10740002
Flash CFG-UART1OUTPROT-NMEA 0 # write value 0 to item id 10740002
RAM CFG-UART1OUTPROT-RTCM3X 1 # write value 1 to item id 10740004
Flash CFG-UART1OUTPROT-RTCM3X 1 # write value 1 to item id 10740004
Flash CFG-UART1INPROT-UBX 0 # write value 0 to item id 10730001
RAM CFG-UART1INPROT-UBX 0 # write value 0 to item id 10730001
RAM CFG-MSGOUT-RTCM_3X_TYPE1005_UART1 0x1 # write value 1 0x1 to item id 209102be
Flash CFG-MSGOUT-RTCM_3X_TYPE1005_UART1 0x1 # write value 1 0x1 to item id 209102be
RAM CFG-MSGOUT-RTCM_3X_TYPE1074_UART1 0x1 # write value 1 0x1 to item id 2091035f
Flash CFG-MSGOUT-RTCM_3X_TYPE1074_UART1 0x1 # write value 1 0x1 to item id 2091035f
RAM CFG-MSGOUT-RTCM_3X_TYPE1084_UART1 0x1 # write value 1 0x1 to item id 20910364
Flash CFG-MSGOUT-RTCM_3X_TYPE1084_UART1 0x1 # write value 1 0x1 to item id 20910364
RAM CFG-MSGOUT-RTCM_3X_TYPE1124_UART1 0x1 # write value 1 0x1 to item id 2091036e
Flash CFG-MSGOUT-RTCM_3X_TYPE1124_UART1 0x1 # write value 1 0x1 to item id 2091036e
RAM CFG-MSGOUT-RTCM_3X_TYPE1230_UART1 0x5 # write value 5 0x5 to item id 20910304
Flash CFG-MSGOUT-RTCM_3X_TYPE1230_UART1 0x5 # write value 5 0x5 to item id 20910304
RAM CFG-MSGOUT-RTCM_3X_TYPE1005_USB 0x1 # write value 1 0x1 to item id 209102c0
Flash CFG-MSGOUT-RTCM_3X_TYPE1005_USB 0x1 # write value 1 0x1 to item id 209102c0
RAM CFG-MSGOUT-RTCM_3X_TYPE1074_USB 0x1 # write value 1 0x1 to item id 20910361
Flash CFG-MSGOUT-RTCM_3X_TYPE1074_USB 0x1 # write value 1 0x1 to item id 20910361
RAM CFG-MSGOUT-RTCM_3X_TYPE1084_USB 0x1 # write value 1 0x1 to item id 20910366
Flash CFG-MSGOUT-RTCM_3X_TYPE1084_USB 0x1 # write value 1 0x1 to item id 20910366