UCHIDA AeroCut - 5 Product Specifications

5. Product specifications
Specifications
Slitter 4 sets (6 slitter blades)
Creaser 1 set (5-level manual crease depth adjustment)
Perforator 2 sets
Number of guillotine or creasing MAX48times / sheet
Paper size (depth direction)
8.25” (A4 short) ～14.375” (B3 short)
Paper size (feed direction)
8.25”(A4 short) ～20.500” (B3 long)
Finish size
MIN1.97”W×2.165”D
Paper weight
32 lbs (Bond) – 130 lbs (Cover stock)
[120-350g/㎡]
Maximum paper curl size
±0.125”
Paper type Offset, Coat, UVcoat, Glossy, Laminate
Paper feeding method Air Suction
Input tray capacity MAX2.35”
Speed
MAX 10 sheets per minute
(in case of one cut from A4 to A5)
Machine dimensions
34.5” W ×28.1” D× 40.8” H
(Occupancy area: 67.7” W×28.1” D×59.1” H )
Net weight 397lbs. (180Kg)
Power supply
Single phase 100-240VAC, 50/60Hz,
2.0A-0.8A
Power consumption 200W
Use temperature 23 to 104°F (-5 to 40°C)
Preservation temperature -13 to 149°F (-25 to 60°C)
Use temperature humidity
45～85%RH
Preservation humidity
25～100%RH
One’s tolerance level
100～240V +6%, -10%
Over voltage category
Category Ⅲ according to IEC60664-1
Pollution degree Degree 3 according to IEC60664-1
３５