Uconnect 4C/4C NAV - Where To? - Point on Map

NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Point on Map
To enter a destination by Point on Map, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Point on
Map” button on the touchscreen.
2. Use the touchscreen to drag the center of the cross over
the desired destination.
3. Once your cross is where you want it, press “Route To”,
or select “Places Nearby” to select a nearby destination.
Then press “GO!” to confirm the destination and begin
route guidance.
6
NAVIGATION MODE — IF EQUIPPED 101