Uconnect 4C/4C NAV User Manual

UCONNECT 4C/4C NAV SETTINGS
Press the “Apps ” button on the touchscreen, then
press the “Settings” button on the touchscreen to dis-
play the menu setting screen. In this mode, the
Uconnect system allows you to access all of your
programmable features.
NOTE: Depending on the vehicles options, available fea-
ture settings may vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
Refer to “Uconnect Settings” in the Owner’s Manual for
further information.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
20 INTRODUCTION

Uconnect 4C/4C NAV Specifications

General

Brand	Uconnect
Model	4C/4C NAV
Category	Car Navigation system
Language	English