• Surround View Camera
Displays a complete 360 degree view of the vehicle’s
exterior environment while backing up. When this fea-
ture is selected, the Surround View Camera can be
enabled or disabled. To make your selection, press the
“Surround View Camera” button on the touchscreen,
until a check-mark appears next to setting, indicating that
the setting had been selected.
• Surround View Camera Delay
When activation occurs by pressing a button in the
“Controls” screen, the initial view will be the default
view (associated with current gear state). Image will be
displayed while in that gear as long as vehicle speed
remains less than 8 mph (12 km/h). When vehicle is
shifted into a different gear (other than ‘REVERSE’), the
image will remain displayed for 10 seconds or until
vehicle speed exceeds 8 mph (12 km/h), at which point it
will immediately cancel and return to the last viewed
screen.
• Surround View Camera Guidelines
Your vehicle may be equipped with the Surround View
Rear Back Up Camera Active Guidelines that allows you
to see active guidelines over the Surround View camera
display whenever the shift lever is put into REVERSE or
the Surround View button on the touchscreen is pushed.
The image will be displayed on the radio touchscreen
display. To make your selection, press the “Surround
View Camera Active Guidelines” button on the touch-
screen, until a check-mark appears next to setting, indi-
cating that the setting had been selected.
• ParkView Backup Camera
When this feature is selected, the ParkView Backup
Camera can be enabled or disabled. To make your
selection, press the “ParkView Backup Camera” button
5
UCONNECT SETTINGS 231
To Next Page
Loading...
