UFactory LITE 6 - Quick Setting Interface and Access

●
After opening this button, the 【Quick setting】 interface
will pop up. In this interface, you can quickly adjust the value of
each parameter.
【Quick access switch】
●
After enabling quick access, you can quickly adjust parameters through
the【Quick access button】in any interface of UFACTORY Studio.
【Quick access】
● You can select the parameters you want to access quickly, and the
selected parameters will be displayed on the quick setting interface.
【Pack the robot】
● Long press the move button and wait for the robot to return to the packing
position, then put the robot into the packing box