1.4.10.1 System Information
On the page of System Information, the robot controller can be rebooted
or the joint can be operated, the degree of freedom (number of axis) of
the current robotic arm, IP address, firmware version, SN address, and
software version of the robotic arm can be checked.
Robot controller shutdown / reboot：
Access to robot conttroller Shutdown
●
Access to [Settings]-[System Settings]-[System Information]
Shutdown / Reboot
The robot controller can be shut down or restarted. Note that the
shutdown / reboot button does not turn off the power supply and the main
To Next Page
Loading...
