Ultimaker 3 - Page 14

14
This in the box
Besides the spools of PLA (350 g) and PLA (350 g), test print and a quick start guide, the Ultimaker 3 is supplied with
several hardware accessories. Check if all these accessories are included before continuing.
1. Power cable (under the printer)
2. Power adapter
3. Ethernet cable
4. Spool holder with NFC cable
5. Material guide
6. Cable cover
7. Glass plate
8. Calibration card
9. Print core AA 0.4 and print core BB 0.4
Another print core AA 0.4 is placed in print head slot 1 of the Ultimaker 3.
10. Hex screwdriver
11. USB stick
12. XY calibration sheet
13. Glue stick
14. Magnalube grease (for Z trapezoidal leadscrew)
15. Machine oil (for X/Y/Z axles)
1
2
3
4
5
6
14
15
13 11
12
8
10
9
7