User’s Manual UT5300X+ and UT5320R-SxA Series
14 / 43
Instruments.uni-trend.com
4. Measurement Display
This chapater includes the contents as follows.
On-screen Display
Sataus Bar
Test Result
Screenshot
Keyboard Lock
4.1 On-screen Display
When high voltage stops to output, press [Test] key to enter <Measurement> page. High voltage only can be
activated in measurement page.
<Meas Setup> page is to display the measured result and judement result;
LCD will divide into several areas to display the corresponding information when enters the test mode.
Figure 4-1 Test Interface of Single Channel
Figure 4-2 Test Interface of Multiple Channels (Take S4A as an example)
To Next Page
Loading...
