User’s Manual UT5300X+ and UT5320R-SxA Series
11 / 43
Instruments.uni-trend.com
3. Inspection and Installment
This chapater includes the contents as follows.
Packing List
Power Requirements
Operation Environment
Key Points When Moving the Instrument
Cleaning
Power on
3.1 Packing List
Before use the instrument please checke
1. Inspect the product’s appearance whether has damage, scratch or flaws;
And confirm the instrument’s model, this series divided into several withstand votltage tester as
shown the following table.
AC programmable hipot tester (10 mA), single channel
AC/DC programmable hipot tester (10 mA), single channel
AC/DC/IR programmable hipot tester (10 mA), single channel
AC/DC/IR programmable hipot tester (20 mA), single channel
AC/DC/IR programmable hipot tester (20 mA), four channels
AC/DC/IR programmable hipot tester (20 mA), eight channels
2. Inspect appendix for the list of accessories.
If any of the accessories are missing or damaged, please contact UNI-T or local distributors of this
product.
Programmable hipot tester
The model is subject to the actual order
RS232C communication wire
High voltage test clip (red and black)
Double head high voltage test wire (with
clips)
Double head high voltage test wire
Only for UT5320R-S4A (4 wires) /S8A (8 wires)
Factory calibration report
Electronic file, it can be download form UNI-T
official website