INSTRUMENTS AND CONTROLSINSTRUMENTS AND CONTROLS
2-152-15
LOAD HANDLING LEVERSLOAD HANDLING LEVERS
WARNINGWARNING
If the operator leaves the operator’s seat orIf the operator leaves the operator’s seat or
stands up during a load handling operation,stands up during a load handling operation,
the interlock system will stop the load handlingthe interlock system will stop the load handling
system. If this happens, return the load handlingsystem. If this happens, return the load handling
levers to neutral or release your hand from thelevers to neutral or release your hand from the
load handling levers. If the operator sits download handling levers. If the operator sits down
again while a load handling lever is still in anagain while a load handling lever is still in an
operating position, the interlock system will beoperating position, the interlock system will be
released. In this case, the load handling systemreleased. In this case, the load handling system
is liable to cause an abrupt move of the truck,is liable to cause an abrupt move of the truck,
resulting in a serious accident.resulting in a serious accident.
CAUTIONCAUTION
Make sure to obey the following instructionsMake sure to obey the following instructions
when you operate levers (lift, tilt, reach and side-when you operate levers (lift, tilt, reach and side-
shift).shift).
••
Seat yourself Seat yourself in the in the operator's seat.operator's seat.
•• Make sure there Make sure there is no one is no one around the around the truck.truck.
LIFT LEVER [1]LIFT LEVER [1]
Pull back on the lift lever to raise the forks and push itPull back on the lift lever to raise the forks and push it
forward to lower the forks.forward to lower the forks.
The lifting speed of the forks can be controlled by the tiltThe lifting speed of the forks can be controlled by the tilt
angle of the lever.angle of the lever.
REACH LEVER [2]REACH LEVER [2]
Pull back on the lever to retract the mast and push itPull back on the lever to retract the mast and push it
forward to advance it.forward to advance it.
The speed of advancing and retracting the mast can beThe speed of advancing and retracting the mast can be
controlled by varying the tilt angle of the controlled by varying the tilt angle of the lever. Tlever. This leverhis lever
is also used to remove and return the battery pack.is also used to remove and return the battery pack.
TILT LEVER [3]TILT LEVER [3]
Pull back on the tilt lever to tilt the forks backward andPull back on the tilt lever to tilt the forks backward and
push it forward to tilt the forks forward. The tilt speed ofpush it forward to tilt the forks forward. The tilt speed of
the forks can be controlled by varying the tilt angle ofthe forks can be controlled by varying the tilt angle of
the lever.the lever.
SIDE-SHIFT LEVER [4]SIDE-SHIFT LEVER [4]
Pull back on the side-shift lever to shift the forks to thePull back on the side-shift lever to shift the forks to the
left and push forward on it to shift to the right. The side-left and push forward on it to shift to the right. The side-
shift speed of the arm can be controlled by varying theshift speed of the arm can be controlled by varying the
tilt angle of the tilt angle of the lever.lever.
11
22
33
44
To Next Page
Loading...
