EasyManua.ls Logo

UniCarriers FRSB14-8 - Page 88

Default Icon
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STASTATIONATIONARY BATTERY CHARGERRY BATTERY CHARGER
3-163-16
USING USING STASTATIONARY BATTERY CHARGERTIONARY BATTERY CHARGER
Recharging the lift truck battery using the stationaryRecharging the lift truck battery using the stationary
battery charger should be performed only by qualiedbattery charger should be performed only by qualied
personnel.personnel.
Park the truck near the battery charger and turn thePark the truck near the battery charger and turn the
key switch to the “OFF” position.key switch to the “OFF” position.
Check the electrolyte level.Check the electrolyte level.
Make sure that the battery charger is suitable forMake sure that the battery charger is suitable for
the battery you are going to recharge, in particularthe battery you are going to recharge, in particular
regarding the voltage and capacity, referring to theregarding the voltage and capacity, referring to the
name plate of the charger.name plate of the charger.
Connect the Connect the output plug output plug of the of the charger charger to the to the batterybattery
plug of the truck.plug of the truck.
Turn Turn on on the the ground-fault ground-fault circuit circuit breaker.breaker.
CAUTIONCAUTION
Make sure the output plug of the charger is securelyMake sure the output plug of the charger is securely
connected to the battery plug of the truck. Improperconnected to the battery plug of the truck. Improper
connection of the plugs might cause an overheatedconnection of the plugs might cause an overheated
plug, lead to a re.plug, lead to a re.
Do not connect the output plug of the stationaryDo not connect the output plug of the stationary
battery charger to the truck half of the batterybattery charger to the truck half of the battery
connectors. The truck might connectors. The truck might fail to operate fail to operate normallynormally..
The automatic charge light [7] and equalizing chargeThe automatic charge light [7] and equalizing charge
light [9] on the control panel come on. If the automaticlight [9] on the control panel come on. If the automatic
charge switch [8] is pressed, an automatic charge willcharge switch [8] is pressed, an automatic charge will
start. If the equalizing charge switch [10] is pressed,start. If the equalizing charge switch [10] is pressed,
an equalizing charge will start.an equalizing charge will start.
Usually give an automatic charge, and give anUsually give an automatic charge, and give an
equalizing charge once a week.equalizing charge once a week.
AUTOMATIC CHARGEAUTOMATIC CHARGE
DANGERDANGER
Never disconnect the power Never disconnect the power supply plug andsupply plug and
the battery connectors while charging.the battery connectors while charging.
The battery charger The battery charger is a high-voltage is a high-voltage device.device.
Never put your hand inside the equipment.Never put your hand inside the equipment.
Otherwise, you might get injured.Otherwise, you might get injured.
WARNINGWARNING
When you want When you want to stop charging to stop charging halfwayhalfway, press, press
the “STOP” switch.the “STOP” switch.
M a k e su r e yo u r h a n d i s n o t w e t w h e n M a k e su r e yo u r h a n d i s n o t w e t w h e n
connecting or disconnecting the plugs. Dryconnecting or disconnecting the plugs. Dry
your hand or put on a glove, if it is your hand or put on a glove, if it is wet.wet.
7. 7. Automatic Automatic charge charge indicating indicating lightlight
8. 8. Automatic Automatic charge charge switchswitch
9. 9. Equalizing Equalizing charge charge indicating indicating lightlight
10. Equalizing charge switch10. Equalizing charge switch
11. Stop light11. Stop light
12. Charge status indicating lights12. Charge status indicating lights
https://www.forkliftpdfmanuals.com/

Related product manuals