8
2. Dark Current will be taken shown and be saved shown after pressing EXIT
Important Notes: It is always a good practice to reset the dark current periodically.
It is especially important if the instrument is hanging on for a long time or the
environment is not stable.
BASIC MODE ā %T/Abs Measure
1. At main menu, scroll * to BASIC MODE and then press ENTER to Select basic T/Abs
mode. If the readouts are not 100.0%T and 0.000A, you may press 0Abs/100%T to blank.
BASIC MODE
2. Select the desired wavelength by pressing the appropriate key. At any time that the
wavelength is changed, blank will automatically be implemented.
To Next Page
Loading...
Need help?
General
