7
Initial Clock Set-up
1. When power is initially applied, the
display flashes
1122::0000 PP
after a
short delay.
2. Enter the time directly by
pressing the numeric keys.
OR
Enter the time by pressing the
s/tkeys.
3. Press
AM/PM
to select the desired setting,
either a.m. or p.m.
4. Press
E
to complete the entry. The display
stops flashing.
You may bypass the steps to set the clock. The scanner will function
as normal, but the clock and alarm features will not function. To
set up clock and alarm time, simply turn scanner off.
CLOCK SET-UP
To Next Page
Loading...
Need help?
General
