Uniden BC244CLT User Manual

6
18.
AALLAARRMM
Indicator Appears when Alarm function is active.
19.
SSCCAANN
Indicator Appears when in Scan Mode.
20.
PPRRII
Indicator Displays when Priority function is active.
21.
WWXX
Indicator Displays when in Weather Mode.
22.
HHOOLLDD
Indicator Displays when in Manual Mode.
23.
LL//OO
Indicator Appears when the current channel is locked out.
24.
P Indicator Appears next to the channel that has been assigned as
the current priority channel.
25. Channel Display Represents the current channel
0011
through
3300
.
26. Frequency/Time 7-digit display that shows the current frequency and
Display time. Last digit shows
AA
for a.m. and
PP
for p.m.
Scanning Overview
The BC244CLT has 30 memory channels. Each can be programmed to store one
frequency within the band of frequency coverage. (For a listing of frequency ranges
and bands, see Technical Specifications on page 26.)
When you press SCAN , the BC244CLT scans each programmed frequency for
activity (skipping channels that are locked out) at the rate of about 12 channels per
second. As the unit scans, the word
SSCCAANN
moves across the display.
When the scanning stops on an active frequency, it remains on that channel as long
as the transmission continues. When the transmission ends, the scanner stays on
the channel for two more seconds, waiting for a responding transmission. If no
responding transmission is detected, the scanning cycle resumes.
BC244clt.qxd 3/11/99 11:59 AM Page 6

Uniden BC244CLT Specifications

General

Brand	Uniden
Model	BC244CLT
Category	Scanner
Language	English