EasyManuals Logo

Uniden BC244CLT User Manual

Uniden BC244CLT
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
5
9.
ALARM
Key Turns the alarm mode on or off.
10
AM/PM
Key Selects a.m. or p.m. while setting the clock time or alarm time.
11.
PRIORITY
Key Turns Priority mode on or off. In Priority mode, the
scanner samples the designated Priority Channel every 2 seconds.
while in Scan or Manual Mode. If a transmission on the designated
Priority Channel is detected, the scanner monitors that channel
until no signal is present.
12.
MANUAL
Key Stops scanning. Press
MANUAL
again to step to the next channel.
Also, use for direct channel access by first entering the channel
number and then pressing
MANUAL
to go directly to that channel.
13. s Key Steps up through the minutes in the clock mode, channels in
the manual mode, or frequency in the weather mode.
14.
WX
Key Press to scan the local Weather Channels.
15.
ON/OFF
Key Turns scanner on or off. Clock mode is still active when scanner is
turned off.
16.
VOLUME
Turn clockwise to increase the volume. Turn counterclockwise to
decrease the volume.
17.
SQUELCH
Adjusts the squelch threshold. Or, use
AUTO
for the
factory setting.
BC244clt.qxd 3/11/99 11:59 AM Page 5

Other manuals for Uniden BC244CLT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden BC244CLT and is the answer not in the manual?

Uniden BC244CLT Specifications

General IconGeneral
BrandUniden
ModelBC244CLT
CategoryScanner
LanguageEnglish

Related product manuals