4
Controls and Functions
1. LCD Display Displays time, channel, frequency, and functions. (Page 6)
2. Numeric Keys Use to program a frequency into each channel for scanning. Also,
use for time entries and direct channel access with
MANUAL
key.
3. Decimal Key Press to enter the decimal point in the frequency. Also, use for
clearing mistakes during entries by pressing twice.
4.
E
Key Enters the frequency or time setting into memory.
5.
TIME
Key Press to view and set time.
6
. LOCKOUT
Key Prevents scanning of the displayed channel. The
L/O
indicator appears when the current channel is locked out.
Lockout is retained in memory. Press
LOCKOUT
again to unlock
the channel. Lockout is active only when the scanner stops on an
active channel or a channel selected in Manual Mode.
7. t Key Steps down through the minutes in the clock mode, channels in
the manual mode, or frequency in the weather mode.
8.
SCAN
Key Press to start scanning.
OPERATION
To Next Page
Loading...
Need help?
General
